SE trans Am pinstriping

Moderators: Regional Representative, Technical Advisor

Forum rules
Only fully subscribed club members may post in this section. Please keep these threads on topic.
Post Reply
User avatar
Beardog
POC Newbie
Posts: 37
Joined: Sun Jul 13, 2014 11:05 pm
Membership No: 14-G406
Year: 1979
Model: Trans Am Y84
Engine: 400
Name: Lawson Smith
Location: Sheffield
Contact:

SE trans Am pinstriping

Post by Beardog » Tue May 05, 2015 9:49 pm

I'm thinking about giving my car a really nice paint job, it' a good car but a few signs of age and chips, and it's a good enough start to turn into a really lovely show finish.

The car is a '79 SE Trans Am, and I had considered ditching the pinstripes and just fitting the normal Trans Am decals, as these cars seem to look neater and cleaner without too much medallion man bling. My other problem with the pinstripes is that they soon look tatty as various joints and corners start to lift and peel due to wash and polish cloths catching.

But, another thought was to have the pinstripes painted onto the basecoat and lackered over rather than using the transfers. Has anybody had hand-pinstriping done on one of these cars, or can recommend a skilled old-school hand pinstriper?
Image

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: SE trans Am pinstriping

Post by bhm1712 » Tue May 05, 2015 10:40 pm

I believe it's common practice to paint clear over the corners and edges of pin striping to prevent the kind of lifting you are taking about. Never heard of anybody painting the pinstripe on, by have seen plenty of trans ams with painted decals and the. Clear over the top of those.
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

User avatar
Beardog
POC Newbie
Posts: 37
Joined: Sun Jul 13, 2014 11:05 pm
Membership No: 14-G406
Year: 1979
Model: Trans Am Y84
Engine: 400
Name: Lawson Smith
Location: Sheffield
Contact:

Re: SE trans Am pinstriping

Post by Beardog » Wed May 06, 2015 11:26 am

I've seen hand-painted pinstripe work on other cars, usually just with door and wing top pinstripes. It can look gorgeous and is flatter than transfers, but finding somebody able/willing to do the job on a SE might be tricky!
Image

andy t/a
POC Elite Poster
Posts: 589
Joined: Sun May 12, 2013 2:54 pm
Membership No: 13-a312
Year: 1991
Model: 91gta+77se trans ams
Engine: 305
Name: andrew broome
Location: Nottingham
Contact:

Re: SE trans Am pinstriping

Post by andy t/a » Wed May 06, 2015 7:14 pm

all the gold pinstripes/decals are what give the se's the wow factor. bet it would cost a fortune if you found someone good enough to hand paint them all on as theres lots off it and a very specialist job. the ultimate se decal kits available now seem to be very good and if you get the pre-formed pin striping its already cut to shape to fit all the contours so should stick better and hopefully last longer. I wondered myself if you could clearcoat over all the decals to protect them as that would be great if it can be done. andy.

User avatar
tecwarrior
POC Newbie
Posts: 96
Joined: Mon Nov 10, 2014 10:51 pm
Year: 1977
Model: Trans am SE 4 speed
Engine: 400
Name: Chris Barker
Location: Kent
Contact:

Re: SE trans Am pinstriping

Post by tecwarrior » Tue May 12, 2015 9:38 pm

Yes you can clear coat over the pin stripes BUT!!!!, from what i can remember, and this is in plain terms, the lacquer expands at a different rate to the stripes in warm weather. Over time this causes cracking and makes a right mess of the paintwork. Better to have them painted on. As you say tho Andy, this will cost a fortune on an SE. Also, its easier to replace a suck on stripe rather that one that has been clear coated over

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: SE trans Am pinstriping

Post by bhm1712 » Tue May 12, 2015 11:07 pm

I would imagine if you clear coated all of them then over time as adhesive loosens up his would also cause cracking etc in the clear coat.
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

User avatar
tecwarrior
POC Newbie
Posts: 96
Joined: Mon Nov 10, 2014 10:51 pm
Year: 1977
Model: Trans am SE 4 speed
Engine: 400
Name: Chris Barker
Location: Kent
Contact:

Re: SE trans Am pinstriping

Post by tecwarrior » Wed May 13, 2015 6:04 pm

yes it would

User avatar
Mikey V8
POC Elite Poster
Posts: 775
Joined: Mon Mar 30, 2009 8:51 am
Year: 1979
Model: Trans am
Engine: 400
Name: Burts Lovechild Owen
Location: Tamworth Staffs
Location: Tamworth Staffs
Contact:

Re: SE trans Am pinstriping

Post by Mikey V8 » Sat May 16, 2015 8:07 am

Ive pinstriped a few SE cars, buy the ultimate kit so there are fewer joins, I bought a touch up stick from Halfords that was just clear lacquer and dabbed it on the ends to stop them from lifting, worked a treat!
Image

Michael Owen
1979 Trans am 400 Fully restored.

User avatar
tecwarrior
POC Newbie
Posts: 96
Joined: Mon Nov 10, 2014 10:51 pm
Year: 1977
Model: Trans am SE 4 speed
Engine: 400
Name: Chris Barker
Location: Kent
Contact:

Re: SE trans Am pinstriping

Post by tecwarrior » Sat May 16, 2015 8:27 pm

I am not looking forward to putting the bird on

andy t/a
POC Elite Poster
Posts: 589
Joined: Sun May 12, 2013 2:54 pm
Membership No: 13-a312
Year: 1991
Model: 91gta+77se trans ams
Engine: 305
Name: andrew broome
Location: Nottingham
Contact:

Re: SE trans Am pinstriping

Post by andy t/a » Sat May 16, 2015 8:51 pm

looks easy on the how to videos lol. how you getting on chris be good to get an update mate. andy.

User avatar
tecwarrior
POC Newbie
Posts: 96
Joined: Mon Nov 10, 2014 10:51 pm
Year: 1977
Model: Trans am SE 4 speed
Engine: 400
Name: Chris Barker
Location: Kent
Contact:

Re: SE trans Am pinstriping

Post by tecwarrior » Sat May 16, 2015 9:47 pm

nearly there. Will upload some more pics. painting all the bolt on bits tomorrow, then the nose and rear bumper. Hope to paint the body wed or thurs eve

User avatar
Mikey V8
POC Elite Poster
Posts: 775
Joined: Mon Mar 30, 2009 8:51 am
Year: 1979
Model: Trans am
Engine: 400
Name: Burts Lovechild Owen
Location: Tamworth Staffs
Location: Tamworth Staffs
Contact:

Re: SE trans Am pinstriping

Post by Mikey V8 » Mon May 18, 2015 8:44 am

Ive done two birds now, just check and double check the measurements, and don't do it outside!
Image

Michael Owen
1979 Trans am 400 Fully restored.

User avatar
tecwarrior
POC Newbie
Posts: 96
Joined: Mon Nov 10, 2014 10:51 pm
Year: 1977
Model: Trans am SE 4 speed
Engine: 400
Name: Chris Barker
Location: Kent
Contact:

Re: SE trans Am pinstriping

Post by tecwarrior » Mon May 18, 2015 8:52 pm

where would i find the measurements ?

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests