Page 1 of 1

2nd Gen 78 T/A Centre Console

Posted: Fri Apr 24, 2015 7:29 pm
by Roscoe
Just seen a video on YouTube of a 68 Camaro that had no centre console and looked great!

Has anyone completed a restoration on a 78 T/A without a centre console? Would it even be possible?

Any thoughts appreciated….

Thanks

Re: 2nd Gen 78 T/A Centre Console

Posted: Fri Apr 24, 2015 9:08 pm
by bhm1712
It is possible yes it doesn't do anything other than cover the shifter and a few wires. Standard auto shifters look ugly exposed so a nice aftermarket one or a custom cover would be in order unless you have a manual in which case a neat boot would be in order. The carpet has gaps in it for the shifter so a custom carpet would be needed too.

Re: 2nd Gen 78 T/A Centre Console

Posted: Sat Apr 25, 2015 4:36 pm
by Roscoe
Thanks buddy. Found a video on YouTube that shows a 77 with no console. Looks minimal and a lot cleaner. This will be something I'm looking to do with mine (TH400 Auto)

Image

Re: 2nd Gen 78 T/A Centre Console

Posted: Sat Apr 25, 2015 5:13 pm
by bhm1712
The wiring which goes up the console is for the shifter position indicator lamp and on some models the seat belt warning harness. Both easily tucked below a carpet.

Re: 2nd Gen 78 T/A Centre Console

Posted: Mon Apr 27, 2015 9:15 pm
by Roscoe
So my next question is regarding windows. The console (I won't be using) has the cut out for electric window buttons. Can I covert current doors to manual!?

Drives door has no internal components and passenger door has motor inside!

Thanks

Re: 2nd Gen 78 T/A Centre Console

Posted: Mon Apr 27, 2015 10:17 pm
by bhm1712
Yes it can be converted to manual windows. When I got mine the window was propped up with a piece of wood as the regulator and motor was missing so I fitted a manual regulator and handle temporarily. It's a pig to get the regulator in and out though. It's been so long I couldn't exactly tell you how I did it now.