Hi all
To make a long story short, does anyone know which way around the HEI distributor should go on a 78TA L78 400?
The 78 service manual shows the vacuum advance pointing passenger side, yet the 78 parts catalog has it pointing driver side (see attached images).
Problem with it pointing passenger side is that it now fouls the heater hose connection on the cylinder head, but because my heads are earlier heads I'm not sure if this is why. But seems odd that two official Pontiac documents differ, which still leaves the question open.
Difficult to find any reliable images on the internet or YouTube, as usually obscured by other parts.
Hoping to find a consensus from a few owners just to be sure either way, all help will be very much appreciated.
Thanks
Steve
78TA HEI Distributor - Which way around?
Moderators: Regional Representative, Technical Advisor
Forum rules
Only fully subscribed club members may post in this section. Please keep these threads on topic.
Only fully subscribed club members may post in this section. Please keep these threads on topic.
-
- POC Newbie
- Posts: 31
- Joined: Sat Apr 29, 2017 9:36 am
- Year: 1978
- Model: Firebird Trans Am
- Engine: 400
- Name: Steve
- Location: Ilkley, West Yorkshire
- Contact:
78TA HEI Distributor - Which way around?
You do not have the required permissions to view the files attached to this post.
- bhm1712
- Site Admin
- Posts: 2672
- Joined: Sun May 10, 2009 4:58 pm
- Membership No: 20-607
- Year: 2001
- Model: Trans-Am WS6
- Engine: 350
- Name: Ian
- Location: Nottingham
- Location: Nottingham
- Contact:
Re: 78TA HEI Distributor - Which way around?
It has a nasty habit of fouling the heater hose, mine used to be the same.
It doesn’t actually matter where it points as long as the actual ignition timing is set correctly. I removed my distributor and set everything so that the vac advance was pointing towards the firewall or straight back at the 12 o’clock position if you like.
As long as the rotor arm is over the number 1 spark lead post when it should be, all will be well with it. You can fine tune afterwards with a strobe lamp.
It doesn’t actually matter where it points as long as the actual ignition timing is set correctly. I removed my distributor and set everything so that the vac advance was pointing towards the firewall or straight back at the 12 o’clock position if you like.
As long as the rotor arm is over the number 1 spark lead post when it should be, all will be well with it. You can fine tune afterwards with a strobe lamp.
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep
![Image](https://farm5.staticflickr.com/4456/38174819782_61c21c5ecb_z.jpg)
Northern England & Midlands Rep
![Image](https://farm5.staticflickr.com/4456/38174819782_61c21c5ecb_z.jpg)
-
- POC Newbie
- Posts: 31
- Joined: Sat Apr 29, 2017 9:36 am
- Year: 1978
- Model: Firebird Trans Am
- Engine: 400
- Name: Steve
- Location: Ilkley, West Yorkshire
- Contact:
Re: 78TA HEI Distributor - Which way around?
Thanks Ian, yes, I think I'll switch it back around.
My feeling now is that the service manual illustration where it's pointing the other way is intended more for the 301, where the cylinder head would be in a different position.
My feeling now is that the service manual illustration where it's pointing the other way is intended more for the 301, where the cylinder head would be in a different position.
- bhm1712
- Site Admin
- Posts: 2672
- Joined: Sun May 10, 2009 4:58 pm
- Membership No: 20-607
- Year: 2001
- Model: Trans-Am WS6
- Engine: 350
- Name: Ian
- Location: Nottingham
- Location: Nottingham
- Contact:
Re: 78TA HEI Distributor - Which way around?
I had a 301 too, and it was the same situation with that. The blocks are the same, just a shorter deck height, but not short enough to stop that issue.
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep
![Image](https://farm5.staticflickr.com/4456/38174819782_61c21c5ecb_z.jpg)
Northern England & Midlands Rep
![Image](https://farm5.staticflickr.com/4456/38174819782_61c21c5ecb_z.jpg)
Who is online
Users browsing this forum: No registered users and 60 guests