78TA HEI Distributor - Which way around?

Moderators: Regional Representative, Technical Advisor

Forum rules
Only fully subscribed club members may post in this section. Please keep these threads on topic.
Post Reply
Steve B
POC Newbie
Posts: 31
Joined: Sat Apr 29, 2017 9:36 am
Year: 1978
Model: Firebird Trans Am
Engine: 400
Name: Steve
Location: Ilkley, West Yorkshire
Contact:

78TA HEI Distributor - Which way around?

Post by Steve B » Sat Mar 31, 2018 10:08 am

Hi all

To make a long story short, does anyone know which way around the HEI distributor should go on a 78TA L78 400?

The 78 service manual shows the vacuum advance pointing passenger side, yet the 78 parts catalog has it pointing driver side (see attached images).

Problem with it pointing passenger side is that it now fouls the heater hose connection on the cylinder head, but because my heads are earlier heads I'm not sure if this is why. But seems odd that two official Pontiac documents differ, which still leaves the question open.

Difficult to find any reliable images on the internet or YouTube, as usually obscured by other parts.

Hoping to find a consensus from a few owners just to be sure either way, all help will be very much appreciated.

Thanks
Steve
You do not have the required permissions to view the files attached to this post.

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: 78TA HEI Distributor - Which way around?

Post by bhm1712 » Sat Mar 31, 2018 1:15 pm

It has a nasty habit of fouling the heater hose, mine used to be the same.

It doesn’t actually matter where it points as long as the actual ignition timing is set correctly. I removed my distributor and set everything so that the vac advance was pointing towards the firewall or straight back at the 12 o’clock position if you like.

As long as the rotor arm is over the number 1 spark lead post when it should be, all will be well with it. You can fine tune afterwards with a strobe lamp.
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

Steve B
POC Newbie
Posts: 31
Joined: Sat Apr 29, 2017 9:36 am
Year: 1978
Model: Firebird Trans Am
Engine: 400
Name: Steve
Location: Ilkley, West Yorkshire
Contact:

Re: 78TA HEI Distributor - Which way around?

Post by Steve B » Sun Apr 01, 2018 9:05 am

Thanks Ian, yes, I think I'll switch it back around.

My feeling now is that the service manual illustration where it's pointing the other way is intended more for the 301, where the cylinder head would be in a different position.

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: 78TA HEI Distributor - Which way around?

Post by bhm1712 » Sun Apr 01, 2018 8:58 pm

I had a 301 too, and it was the same situation with that. The blocks are the same, just a shorter deck height, but not short enough to stop that issue.
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest