Do U wonder how to easily clean the gunk out of the bottle?

Moderators: Regional Representative, Technical Advisor

Forum rules
Only fully subscribed club members may post in this section. Please keep these threads on topic.
Post Reply
User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Do U wonder how to easily clean the gunk out of the bottle?

Post by bhm1712 » Thu May 16, 2013 9:39 pm

I bought a used coolant bottle which needed cleaning inside. After trying various chemicals and cleaning stuff the results i got were naff. The grime inside the bottle just would not shift, and the shape of the bottle and neck size makes it almost impossible to get a brush or scraper inside.

After a bit of research online it seemed as though a popular solution State-side is to use cat litter, mixed with a bit of water and then shake like hell!

Well i thought it cant hurt to give it a go. Lucky my mum has a cat and let me nick a tub full.

Anyway, i poured about half a cup of litter inside the bottle and topped it up with water until the litter was just covered. Replaced the cap, and sealed the overflow pipe with tape. Shook like crazy for about 10 minutes.... results:

Before:

Image

Image

After:

Image

Image

Image

Id say its done a decent job! some minor staining of the plastic left over, but i think its engrained in the material! im happy with it now! Maybe it will help somebody else..
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

User avatar
Davy J
POC Posting God
Posts: 3337
Joined: Fri Oct 09, 2009 3:41 pm
Membership No: 09-R61
Year: 1999
Model: FIREHAWK
Engine: 350
Name: DAVE
Location: Clacton Essex
Location: ESSEX
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by Davy J » Thu May 16, 2013 9:53 pm

Didn't help the cat, it's been walking round with legs crossed for two days... :oldrolf:
Dave. Vice Chairman & Publicity Manager

SUPERCHARGEDGTA

Re: Do U wonder how to easily clean the gunk out of the bott

Post by SUPERCHARGEDGTA » Thu May 16, 2013 10:01 pm

:oldrolf:
looks good

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by bhm1712 » Thu May 16, 2013 10:17 pm

;)
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

Jeff73
POC Jr. Poster
Posts: 245
Joined: Wed Sep 09, 2009 8:39 pm
Membership No: 09-A04
Year: 1973
Model: transam
Engine: 455
Name: Jeff
Location: Rayleigh, Essex
Location: hi
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by Jeff73 » Sat May 18, 2013 9:25 pm

I have often had too clean radiator expansion bottles and have found that using an egg cup full of bleach and adding hot water to it ,leave it to soak for about an
hour, can bring the bottle back to almost new

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by bhm1712 » Sun May 19, 2013 3:14 pm

Bleach and warm water did nothing for this grime..
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

User avatar
Newcastle knight
POC Poster
Posts: 308
Joined: Sat Mar 28, 2009 11:40 am
Membership No: 20-825
Year: 1987
Model: Trans Am GTA
Engine: 350
Name: Scott
Location: Newcastle Upon Tyne
Location: Newcastle Upon Tyne
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by Newcastle knight » Sun May 19, 2013 11:21 pm

Cool. tell you how i done mine though, i went and bought a babys bottle cleaning brush, its on a stiff bendy wire so you can really scrub the inside and get into the corners.

Rocky
POC Jr. Poster
Posts: 160
Joined: Mon Mar 30, 2009 9:08 pm
Year: 1978
Model: Trans am
Engine: 0
Name: Richard
Location: Watford
Location: Watford
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by Rocky » Mon May 20, 2013 8:56 pm

Dip in TFR cleaner overnight should bring it up like new.

User avatar
banker
POC Ultimate Poster
Posts: 1174
Joined: Mon Mar 23, 2009 8:22 pm
Membership No: 20-184
Year: 1987
Model: TransAm
Engine: 350
Name: James
Location: Southampton
Location: Southampton
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by banker » Mon May 20, 2013 9:05 pm

Rocky wrote:Dip in TFR cleaner overnight should bring it up like new.
This stuff? http://www.thebigshiner.com/SHOP/index. ... duct_id=46
Membership no: 20184 James Little C Image
With an official 325 horse power and 405 lbs of torque

Rocky
POC Jr. Poster
Posts: 160
Joined: Mon Mar 30, 2009 9:08 pm
Year: 1978
Model: Trans am
Engine: 0
Name: Richard
Location: Watford
Location: Watford
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by Rocky » Mon May 20, 2013 9:15 pm

Sort of we buy it in 25 litre drums but it is similar it cleans most things up like new but be careful on some materials or paintwork as will remove all waxes etc. I also use it on engines not quite as strong as degreaser but doesnt leave a smell.

User avatar
banker
POC Ultimate Poster
Posts: 1174
Joined: Mon Mar 23, 2009 8:22 pm
Membership No: 20-184
Year: 1987
Model: TransAm
Engine: 350
Name: James
Location: Southampton
Location: Southampton
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by banker » Mon May 20, 2013 11:48 pm

Cheers, looks cheaper than Gunk
Membership no: 20184 James Little C Image
With an official 325 horse power and 405 lbs of torque

jonbullnose
POC Newbie
Posts: 91
Joined: Tue Mar 31, 2009 10:53 pm
Membership No: 14-A367
Year: 1972
Model: bully/parrisiene
Engine: 400
Name: Jon Steel
Location: Reading, Berks
Location: berkshire
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by jonbullnose » Tue Sep 17, 2013 3:11 pm

in the trade most of us use a couple of dishwasher tablets in the cooling system for cleaning and let it get hot empty out refill job done as most chemicals will leave a bit in not ideal where as dishwasher tablets pretty inert and do not foam up

User avatar
lutonmatt
POC Ultimate Poster
Posts: 1990
Joined: Sat Mar 28, 2009 11:15 am
Year: 2001
Model: cl55 amg
Name: Matt
Location: Chatham, Kent
Location: Chatham, Kent
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by lutonmatt » Tue Sep 17, 2013 6:59 pm

I normaly use washing powder
Image
Dr Matt AKA "Dodgy Windows"
kent krew

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by bhm1712 » Tue Sep 17, 2013 10:55 pm

with this thread i was referring to the coolant bottle plastic itself rather than the cooling system in general. The cat litter sort of removes any engrained grime and removes a little bit of that rustic (rusty) orange tint the plastic gets!

I like the dishwasher tab idea. Might give that a go before i winterise the cooling system!
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

jonbullnose
POC Newbie
Posts: 91
Joined: Tue Mar 31, 2009 10:53 pm
Membership No: 14-A367
Year: 1972
Model: bully/parrisiene
Engine: 400
Name: Jon Steel
Location: Reading, Berks
Location: berkshire
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by jonbullnose » Thu Sep 19, 2013 9:06 am

dishwashers are also great for cleaning parts but dont tell the missis lol

User avatar
Newcastle knight
POC Poster
Posts: 308
Joined: Sat Mar 28, 2009 11:40 am
Membership No: 20-825
Year: 1987
Model: Trans Am GTA
Engine: 350
Name: Scott
Location: Newcastle Upon Tyne
Location: Newcastle Upon Tyne
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by Newcastle knight » Mon Dec 02, 2013 5:15 pm

i think i need to just buy new ones for my car when i put the engine bay back together, they've been cleaned up but still quite dingy

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: Do U wonder how to easily clean the gunk out of the bott

Post by bhm1712 » Tue Dec 03, 2013 11:38 am

probably best to do that if you want a detailed engine bay. I was just looking to get mine functional at the time!!
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests