Tightening up the steering - 2nd gen

Moderators: Regional Representative, Technical Advisor

Forum rules
Only fully subscribed club members may post in this section. Please keep these threads on topic.
Post Reply
User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Tightening up the steering - 2nd gen

Post by bhm1712 » Wed Jul 10, 2013 9:34 pm

Ive always thought the steering on my Firebird is very light, maybe a little too light. When compared to say my missus's Focus, which feels really positive and has a bit of resistance inherent in it, the Firebird is so light that you can steer it with your little finger. I prefer the more positive and resistive feel. Can the steering be tightened up a bit?
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

SUPERCHARGEDGTA

Re: Tightening up the steering - 2nd gen

Post by SUPERCHARGEDGTA » Wed Jul 10, 2013 9:50 pm

replace steering box with one from a transam, they have more feel and higher ratio

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: Tightening up the steering - 2nd gen

Post by bhm1712 » Wed Jul 10, 2013 9:52 pm

Ok Jon - cheers for that. I will certainly do that when it comes to replacing the box - its slightly leaking anyway from the pitman arm shaft so it will need doing soon.
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

thirdgen

Re: Tightening up the steering - 2nd gen

Post by thirdgen » Wed Jul 10, 2013 10:06 pm

I had a ws6 one on my firebird much better . The corvette is alot heavier than the firebird tho more sporty I guess ....

SuperDuty455
POC Newbie
Posts: 41
Joined: Tue Jul 27, 2010 2:28 pm
Year: 1984
Model: Firebird Trans Am HO
Engine: 305
Name: François Martinez
Location: France
Contact:

Re: Tightening up the steering - 2nd gen

Post by SuperDuty455 » Wed Jul 10, 2013 10:46 pm

SUPERCHARGEDGTA wrote:replace steering box with one from a transam, they have more feel and higher ratio
Not necessarily true. It has been debated many times on various forums I go to and some have found typical 3 turns lock to lock boxes even on all original WS6 2nd Gens. Apart from testing them, the most sure way to get a close ratio box is to get one from a 3rd Gen IROC or GTA with WS6 or F41 suspension. Even the one in my '89 base Firebird parts car is a "Z" code Saginaw 800 with 2.5 turns lock to lock. Cars with 16" rims had the 2.25 turns box. BUT, 1980-up boxes fittings are metric and not imperial. So you will need adapters for the pump hoses or ideally a 1980-up steering pump. Other than that they're a straight swap if you keep the 2nd Gen pitman arm.

SUPERCHARGEDGTA

Re: Tightening up the steering - 2nd gen

Post by SUPERCHARGEDGTA » Wed Jul 10, 2013 11:23 pm

only had 2 second gens and the transam was a lot less "over assisted"
assumed they were all the same, thanks for the input :thumb:

User avatar
bhm1712
Site Admin
Posts: 2672
Joined: Sun May 10, 2009 4:58 pm
Membership No: 20-607
Year: 2001
Model: Trans-Am WS6
Engine: 350
Name: Ian
Location: Nottingham
Location: Nottingham
Contact:

Re: Tightening up the steering - 2nd gen

Post by bhm1712 » Fri Jul 12, 2013 8:13 am

Hmm interesting stuff
Ian Hopkinson - Membership Manager & Forum Administrator
Northern England & Midlands Rep

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests