Pontiac Owners Club UK

so my car still has the factory delco cassette player

need to make way for a unit with a usb connector

any pics of what some of you guys have fitted

I had a single DIN in mine with a adapter,just a cheapo one,top of the range stereo's are not my thing,i like to hear the engine as well.

do like I did, chuck it all out to save weight and listen to the engine
leaves a handy area to put fuel pump and nitrous switches

take a look at my threads here:

viewtopic.php?f=43&t=4966

viewtopic.php?f=43&t=8872


this is how i fitted a Tevion head unit into my second gen. you can fit whatever you like.....as long as your handy with wiring.

The threads are not brilliantly detailed so if you need help just post here. You do have the advantage that yours still has the original radio and so all the wiring will be easy to identify unlike mine which were missing any plugs and was all over the place. I would recommend upgrading the speakers though as the factory ones are poor in terms of modern standards.

is there an adaptor available to convert to a standard iso conection or just a case of chopping the wires

It's easier to chop and splice a new ISO connector in. You need to introduce new wiring to fit a new head unit so as far as I know there is not a converter available.

pulled the old stereo today

how are you supposed to mount a new one its an awful big hole with no where to mount the cage to

dexyman wrote:pulled the old stereo today

how are you supposed to mount a new one its an awful big hole with no where to mount the cage to

My din cage fitted ok - a tad loose but I was able to bend the tangs on the cage which hold it in place enough to hold it in there tight. It's not shifting anywhere. If your not happy with that you could fabricate a plate which is shaped to fit the old radio position and has a hole perfectly sized for the new din cage.you can then drill some small holes into the plastic around the original hole and in the new plate and bolt it in place. Get some countersunk bolts so it looks neat

There is no rear support most of the weight is taken by the front but I got a piece if flat steel and made a rear supporting leg to keep the radio held up at the back. It rests on the transmission tunnel behind the dash

on my '78 I wedged a tennis ball under the head unit
only as a short term fix, though it was still there 10 years later when I sold it

I think we are mistaken. He is talking about a third gen radio. I thought it was a 78 second gen

so did I
It says 1978 on car details on the left