
The stock wiring runs the lights directly through the switch on the dash which isn't ideal so I made up a new wiring loom to power them via relays.

The finished harness (except for the passenger side H4 plug which I attached after feeding the wiring through the bodywork):

The relays mount perfectly on the stock relay bracket, there were even holes in just the right place for the screws.

With everything installed I got the alignment adjusted at my local MOT place. I'm using Osram Nightbreaker bulbs and I'm really impressed with the light output - much brighter and more even than the old sealed beams. I haven't got a photo of the lights on at night but this is what the new lens looks like mounted in the car:
