I fitted a SSBC front disc brake conversion to my first gen some time ago but was always a little disappointed with them. It's based on the OEM disc brake option and, I suspect, may have included semi-metallic pads as supplied. In trying to identify the issue, I did make sure that everything was working as it should, including fitting a vacuum pump and bias valve but without any improvement.
After a little reading - and suspecting the SSBC pads - I decided to try a set of EBC Ultimax pads as a last resort. I bought DP1145 (about £42) for generic GM single-piston calipers as fitted to first and second gen F Bodies.
First impression is a massive improvement in performance, particularly from cold.
So if you're disappointed with your brakes, I'd certainly try a set of these before I spent a packet on uprated discs and calipers.
Disappointed with your disc brakes?
Moderators: Regional Representative, Technical Advisor
Forum rules
Only fully subscribed club members may post in this section. Please keep these threads on topic.
Only fully subscribed club members may post in this section. Please keep these threads on topic.
- Mick Clark
- POC Newbie
- Posts: 1
- Joined: Tue Sep 15, 2009 12:48 pm
- Membership No: 10-P166
- Year: 1968
- Model: Firebird
- Engine: 400
- Name: Mick
- Location: Longfield Hill
- Contact:
Disappointed with your disc brakes?
"If it's wrong, it's my fault"
68 convertible
68 convertible
- cowboy1sf
- POC Ultimate Poster
- Posts: 1760
- Joined: Sat Mar 28, 2009 11:10 am
- Membership No: 20-440
- Year: 2001
- Model: TA WS6
- Engine: 350
- Name: Steve Fullam-Cowboy
- Location: Guildford Surrey
- Location: Guildford Surrey
- Contact:
Re: Disappointed with your disc brakes?
GET OFF MY LAWN!!
{BIG C}
Owner of the Black Pimpernel
Who is online
Users browsing this forum: No registered users and 3 guests